Results 1 to 7 of 7

Thread: 3330 no signal - help

  1. #1

    Exclamation 3330 no signal - help

    Hey, need some help.

    Basically, i got a nokia 3330 v4.16. its problem was that it got signal for 2 secs on any network, then dropped it permanently.

    I have flashed a v4.50 mcu+ppm to it, and have flashed a new 3330 eeprom (used rolis flasher 4.71, and ued rolis noktool 1.8 for sp unlock, imei and faid) but still no luck.

    Have opened it up and all is in mint condition, no cracks or damage anywhere, so deduced it must be software problem.

    One thing- when i reset factory settings from the phone settings menu using security code, it shows the network on screen, but no signal - strange isn't it.

    Would be gr8 if sum1 cud offer advice.

    thanks

  2. #2
    do a full faid calc with knok. do a full factory reset before and after. basically this is just a faid problem.

  3. #3

    sort of fixed, but...

    hey, its sort of fixed the problem, i've tried it on networks, and the following problems happens: it gets good signal for exactly 10seconds, and then it goes permanently until i restart the phone - then the same thing happens again.

    Btw it still happens that i can get the network name if i reset factory settings via the phone settings menu with no signal bars shown.

    Help...!

    thanks

  4. #4
    Join Date
    Apr 2002
    Location
    jerusalem
    Posts
    52

    Unhappy

    Hi guys,
    the same happend to me, but it seems as hardware, i have tried a lot of methods for faid, but nothing help.

  5. #5
    it happend to me too, after I flash mcu+ppm, it found no signal, only once in a while and after a minute it restart.

    when I check using the Bphreak logger calc it said
    FLS PPM doesnot match with flashed PPM

    what's the error with the ppm? I've check the checksum it's OK

    any body can help??????

  6. #6
    Join Date
    Jun 2002
    Location
    Phil
    Posts
    58
    try eeprom tools 3.1 to calc faid.

    hope this helps.!

  7. #7
    Try this : Go to menu 6-2-4 (Settings-Phone settings-Network selection) and set it to manual. If it finds anything, select your network. If it works, set it back to automatic.
    Last edited by User32; 24-06-2002 at 09:00 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •