Unsuccesful flashing of T100 -> Bad for your health

[rares]

Hello Guys..
I think i read everything on this forum...but i still can`t get my Samsung T100 back to normal...
The original firmware was Orange U.K. ...i don`t know which version ...

I`ve tried different firmware versions ..i think 5 until now...and it still won`t work.

Here`s how i`ve done this ..

1. I took out my battery ..which btw was fully charged...
2. I waited 20 seconds or more
3. I placed in the same battery and pluged the t100 into my datacable.
4. I opened Toolbox 4.3.2 or WinTdnForSGH-T100 ..selected both of the firmware files.
5. I started flashing.

Ok after this standard procedure i tried several other procedures :

1. i tried to start the phone with the datacable still connected ( didn`t work )
2. i tried to take the data cable out and start the phone ( didn`t work - i mean the phone didn`t start properly...it just started flashing the keys / or only the LED )
3. I tried to take out the cable , take out the battery ..put it back in (same one) after 20 seconds and then start the phone... didn`t work.



Maybe someone has the T100 on Orange U.K. and could send me the dump files for my Samsung T100 ....or maybe someone could tell me step by step how to fix this mess.



If you got the key to my problem i`ll be forever thankful!

Thank you very much ..i mean it !

[sk3done]

firstly make shure u are useing 98 only as the samething allways happends to me on xp /2000 then flash the phone with any t100 firmware with the flasher suppled with the flash then use this proggie if it does the same thing, in the program i have provided link to select repair system failure and repair battery problem and all will be okay
PM me if u still have problems mate and i will walk u through it step by step with u

[aamszia]

Do you have it Registered Version or Cracked version.
Complete one !!!

[rares]

Thank you very much guys ..i`ve managed to make it work ...

I didn`t push the ON/OFF button as long as i should....

Message for other newbies that have the same problem i did :

KEEP THE ON/OFF BUTTON UNTIL IT STARTS...IT MUST START ( after reflashing ).

Thanks once again guys !..You`re great !