SOLUTION FOR 2118 "Sleep phones" Change to C45

**Sixth`SenSe** · 05-08-2002, 08:14 AM

Try with unisiemens
1. preapare C45 or 2118 working Phone
2. work with mode SL45 (because 2118 have 6 MB ram like SL45)
3. read working phone and then saved.bin (6 MB)
4. write 2118 death phone with saved.bin (with SL 45 Mode) wait end proccess (100%)
5. wrong software >>>>>try log with max V3.0 (mode C45)
6. If you have dongle make map with dongle/ or request to me
7. your map ready write map to handys with mode SL45

My 2118 change to C45
tested by me 100% work

NB : I'M WORK WITH UNISIEMENS WITH EMULATOR (NO NEED DONGGLE)

if you have 2118 backup file try with this methode and please result to the forum...pls

**khonyot** · 06-08-2002, 11:31 PM

I was followed all of your instruction and it was true about the message.
In the pint '5. wrong software >>>>>try unlock or map with max V3.0 (mode SL 45 too)', where can I download the MAX V3.0 software?

Did U have UniSiemens flash file for 2118?

**Sixth`SenSe** · 07-08-2002, 04:31 AM

DL this Attachment

**khonyot** · 07-08-2002, 06:25 PM

I've tried it before (last night) but it won't work. Did you have 2118 flash file (it's better if you have Indonesian version - LG7).
Or where should I download it for the collection software for Siemens 2118.

ArnoldS

**Sixth`SenSe** · 07-08-2002, 09:49 PM

try this and please send me your log

**khonyot** · 08-08-2002, 05:53 PM

Baiklah, kemarin udah di DL dan ternyata saya juga punya SW-nya. Berikut LOG file Siemens 2118 saya.
Ada tiga buah file yang saya kirim, yaitu log 2118 yang dibuka dg Me45, S45 dan SL45.
Tapi, mengapa ya nggak mau saya buka dengan list phone model C45?

Ma kasih solusinya, dan dima web u/ 2118 yang bagus?

Kho Nyot Hoo maniezzz

**Sixth`SenSe** · 08-08-2002, 10:34 PM

try this map...2118 web site i dun know

**khonyot** · 08-08-2002, 11:41 PM

Yawwww

It's just blink and then off (but not off road, balapan kali)

Anybody help me.... pls send me your 2118 UniSiemens Flash and EEPROM file.
Did you have your own website?

Arnold 'Kho Nyot Hoo' Silitonga

**Sixth`SenSe** · 11-08-2002, 08:18 AM

unzip this attachment file
blink = wrong software = phonecode = phone disabled

try to unlock with c45-mt50 progy
1.phone must off condition
2.click unlock
3.click on phone 1x
4.wait until progy work "succesfully done"
5. click on your c45 alive
6.good luck

now your 2118 alive but change to c45
no animation Duck screen saver again and no calculator feature
go to super market or stationary to buy CASIO Calculator

**khonyot** · 24-08-2002, 11:07 AM

Hi...
Now I have my friend 2118 UniSiemens flash file. I'd copied the flash n eeprom to mine with SL45 mode, still WS. What should I do then? C45-MT50 progy didn't respond. When I unlock with SL45, the phone just blink.

Gue blink-satan nich.

**Sixth`SenSe** · 24-08-2002, 09:38 PM

send me your phone log
i give you map

so when u arived map from me
please write to your phone wiyh SL 45 mode

do U?

**ma1362** · 25-08-2002, 04:01 PM

to sixth sense:

what software are you using in reading siemens sw? can you share it with me? thanks in advance.

ma1362

**Sixth`SenSe** · 25-08-2002, 04:33 PM

DL this software

make log C45 with mode C45

and then send me your log
i'll send you Map

and transfer your map to handys with mode SL 45

i hope your 2118 alive again......but change C45
no calculator, no animation screen saver