Contact service after ppm splitter 2.5

[Abe]

Iremoved JMP ringtone and added CIRCLES from 8210 and got contact service even all checksums are ok.........

[Abe]

on 6110.....
when i added only tone not remove....idont get network

[mehdi]

i' ll try to understand what happen!!
CIRCLES from witch phone ??
i added 3330 ringtones to 3310 and it works normally!!
and also removed jumping from 5110 and added fool about from 3330 on it and the phone works fine!!!!!!!

[Abe]

you made only faid update after that?

[mehdi]

you must calculate faid with logger !!!!
this logger work fine!
it 's my version

[mehdi]

yes !!!
but if your phone is unlocked you must got an original full flash to update faid!!!
be careful

[Abe]

AFTER LOG WRITING NO NETWORK.......

[mehdi]

do you have a 6110 dsp rom3 ??

[Abe]

no....rom4

[mehdi]

normally it works!!
you must select the pathched flash file (with new ringtones or with removed ringtones) then you read MSID and IMEI with koci logger, and past it to the sell
calculate the faid with Soft and upgrade phone with logger!
i have rom 4 phone and it works fine!!!
is your MSID = 0-------0110----------0 ??
if yes try to flash with an original mcu file
if no it will work!!

[Abe]

8210 works ok,3310 works ok,3330 works ok,8850 works ok,6210 works ok,6250 works ok,6110 DON'T WORK!!!!!!!
I tested all this today.........
Regards.......

[Abe]

And one more thing.......
If i remove one tone from flash and add another i allways get CONTACT SERVICE....if i only add ringing tone,then it works ok.......

[Garry]

i have a phone having contact service, what i did i flash out the old file ,replace with a full flash of 3310 4.06fls after doing so, power resume and using nokia tool i found out all the locks are closed and i dont know what to do next can help please, how can i open or reprogram the eeprom? is this the next step

[Yasser]

[o_MAST]

Hi guys,

PPM splitter v2.5 and 2.6 don't work on my computer! When I try to calc checksums or add/del tones the program freeze!
What I have to do?

B.R.

Bye

[Abe]

When you calculate checksum allway click on FIX CHECKSUM.....
then it works ok......
if u first calculate and then fix....then the prog freezes......

[mehdi]

you must wait a lot of time!!
but it works!!
sorry but my soft isnt fast !!!

[Garry]

Hi yasser!!

Tnx for the the tips, but i think you folks more advance in this forum than we are here in the phils. Me by nature can trouble shoot hardware related not all, but can fix cellphone, i think categorizing my self as level 4 technician and all the procedure you are trying to share is out of my capability to comprehend but flashing with full backup (300000-4000000) it is finished but to dump with a virgin eeprom i dont know honestly. I have the back up file of the virgin eeprom, i think i need some learning to do it, considering myself a rookie in this field, and i don't those software you mentioned for me to execute it. my code name is sniper.

can u help me! i am hpoeful ican learn fast the way folks are doing. thank You


sniper!!!!!!!!!!!!!!!!!!!

[D0Hbert]

Hey Spider, maybe we can help one another. I'm fairly new in mobilephone repair myself. We're both from the same country. I know a bit about these software related stuff. Maybe we can help each other. I'm fairly new in hardware based repair. Maybe we can share tips and all.

[Garry]

Hi Yasser!!!!

Tnx I understand now, as I was looking at your tips and try to comprehend it, then
applying it , the part of the calculating the FAID
How do u do it and and the latest version in our country is only 5.03v 3310 can u give me details in
doing this FAID , hope I can pick up the information u are sharing to me Tnx God Bless Email me Okey Tnx Again


Sniper!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Garry]

Hi Dohbert!!!

Are u refering to me my code name is Sniper wat place here in the phils i am from marikina do u have an email address so i can send you , some info on the hardware related problem in my capacity to share nice meeting u here at the forum can u give me details of reprograming the eeprom

[Anonymous]

hey! hey! hey! GARRY!!! saan ka sa marikina? d2 lang ako sa antipolo---sa cogeo! ano ba problem mo?
baka maka 2long ako! matagal na rin akong celfone technician,almost 3 yrs pero laging nag-uupgrade ang nokia so nag-upgrade na rin ako.amd so we can share tips and all.--------eugene.
txt mo ko 09173868040
GODBLESS!!!!!!

[Yasser]

Hi Garry

Have you fixed your phone yet? Sorry, I have been away and busy doing other stuff. I hope you have fixed your phone.

What have you done so far?

BR

Yasser

[Garry]

Hi Yasser!!!!!

What i done so far after flashing the dead with a full flash 3310 4.06 it power on but all the locks are still close and u instruct me to dump a virgin eeprom of 3310 file, question what tool or software, i need to execute this proedure, and u name those software but i don`t have them, and how will u used to compute or calculate for the FAID, i have the softwarelike the nk calc a prototype v1.2, will this work, do i need a eeprom tools of v 3.0 by b-phreaks can u send them to me or can u give me the details in how to execute the whole procedure thanks and have a nice day

[Garry]

Hi Yasser!!!!!

What i done so far after flashing the dead with a full flash 3310 4.06 it power on but all the locks are still close and u instruct me to dump a virgin eeprom of 3310 file, question what tool or software, i need to execute this proedure, and u name those software but i don`t have them, and how will u used to compute or calculate for the FAID, i have the softwarelike the nk calc a prototype v1.2, will this work, do i need a eeprom tools of v 3.0 by b-phreaks can u send them to me or can u give me the details in how to execute the whole procedure thanks and have a nice day

[Yasser]

[Yasser]

Hi again

Mistake in my previous post....It should read ' I hope I HAVE NOT confused you'

heheeh

maybe ur confuse now...

BR

Yasser

PS....problems.....let me know