6260 Problem

[g1_teg_lover]

My Nokia 6260 has been giving me a "Phone Startup Failed, Contact Retailer." message for about a month. I have tried to reflash it with the right MCU and PPM files, and still get the same message. When Trying to do a user area format, under prodigy, i get a Formatting User Area......Failed!.

Log of Flasher...

Boot 1 Ok.. , UPP_WD2 0x1081
Boot 2 Ok..
FlashID0: 0001007E, AMD Unknown
Algorithm : w3_amd_b.fia
Done.

MCU flashing - RM25PE305150.C1
Init flashing...
Boot 1 Ok.. ,UPP_WD2 0x1081
Boot 2 Ok..
FlashID0: 0001007E, AMD Unknown
Sending Algorithm...
Success. Performing Authentification...
MSID: 84173199ED8431E7A3FCABBF91
Uem ID:00D50AF7
Erasing MCU area...
Area: 00000000-0000FFFF - Erasing...
Area: 00010000-00FFFFFF - Erasing...
Area: 02000000-02C9FFFF - Erasing...
Area: 02FC0000-02FEFFFF - Erasing...
MCU area erased.
Writing MCU file...
Mcu flashing took: 11 min 11 sec
PPM flashing - RM25PE305150.02
Erasing PPM area...
Area: 00000000-0000FFFF - Erasing...
Area: 02D00000-02F0FFFF - Erasing...
PPM area erased.
Writing PPM file...
Success.
PPM flashing took: 48 sec
Total time: 11 min 59 sec
Polling product, Please wait...
Detected product: RM-25
All Done.
Performing Symbian Reset...
Reading current mode... LOCAL
Changing phone mode...TEST
Executing selected option(s)...
Resetting user code : Done. 0 sec
Resetting user data : Failed!
Performing Symbian Reset...
Reading current mode... TEST
Executing selected option(s)...
Resetting user code : Done. 0 sec
Resetting to leave factory: Done. 0 sec
Resetting to software upgrade : Done. 0 sec
Resetting service center: Done. 1 sec
Resetting to production tune: Done. 0 sec
Formating User Area ...: Failed!


Attached are screen shots of the setup on the flasher software..

[BadTOYO]

sorry for not being able to help with your problem, but i also own a 6260 and i'm not sure what you mean by "flashing the phone with the right MCU and PPM files"... are you referring to a firmware update? i thought the only way to reflash the firmware was by using some sort of external device, and not directly by uploading files to the phone... am i missing something here? i also want to upgrade to the latest firmware, but since this phone is not available in the US, no one seems to be able to do it...
R

[g1_teg_lover]

sorry, i ment to include that I am using the prodigy flasher, the firmware version 3.04 (IIRC)