NK CALC by Dejan not working on a P4 for 3310

**hooi76** · 26-11-2002, 10:48 AM

Can somebody here know what is the prob?

I can't use the prog to set the faid using P4, but i can use the prog at Celeron 550 to set the 3310 Faid without a problem.

What is the prob?

Please Assist,
Thanks In Advance.

**westy** · 26-11-2002, 11:06 AM

are you using the same operator systems or have you selected the right port?

**Alinus** · 26-11-2002, 12:22 PM

the pc is too fast for dejan

**hooi76** · 26-11-2002, 01:51 PM

Thanks for ur reply.

So is there any software like NK CALC, that can calculate the Faid. i tried KNOK, Eeprom Tool, Rolis and Nokia Tool by Jordik. They aren't working properly, especially when i try the Full Flash including Eeprom (20-40). I don't get signal. Or when i change the COBBA IC.

Or can somebody modified the tool, to be used in P4 WIN XP?

Thanks In Advance.

**wyjian** · 26-11-2002, 04:10 PM

suggest you to use win98 system in safe model .
i have the same problem , it worked in win98 safe model

**hooi76** · 26-11-2002, 05:58 PM

u mean in safe mode under 98 OS (on a P4) will work. i try under 98 (on a P4) normal mode, but it won't work.

**Alinus** · 26-11-2002, 07:21 PM

ok boys
on win 89 se
if u put nc calc files directly on root C: (no folder - directly on root)
the proggy will work 100%

no safe mode, only normal mode

i do believee that a pIV is too fast for that soft but it worths a try...

**hooi76** · 27-11-2002, 01:54 PM

i tried on win xp, still not working on this P4 1.6

**Alinus** · 27-11-2002, 03:44 PM

not xp....
use 98se

**hooi76** · 27-11-2002, 05:10 PM

i know, just wanna try on that XP

**madmania** · 28-11-2002, 09:46 AM

i have use win98 se. P IV 1500mhz normal mode
it's works
but i have to connect to com2, otherwise it would not work.

i think this is bug of nk calc ??? hahahaha

**hooi76** · 28-11-2002, 01:18 PM

Thanks mate! i'll have a try

**madmania** · 29-11-2002, 06:21 PM

@hooi 76

share your experince with the other's.
are u success??

if u still have problem just tell me. (PM is prefered

hahaha)

**hooi76** · 30-11-2002, 02:44 AM

i format my c: and tried to install the Win98 (not sure of wat edition) and i try on com2. BUT sorry, still no joy. It just said (Bad Connection)

**wyjian** · 30-11-2002, 06:17 AM

u should try safe mode!!

**madmania** · 30-11-2002, 06:18 PM

have u set up or install this software first???
try to install first to make the program have path on the directory and use com 2 for the connection.

check your cable connection.

why u don't try nook tool 1.8 ???
this software is good