Results 1 to 8 of 8

Thread: Contact Service

  1. #1
    Join Date
    Dec 2002
    Location
    denmark
    Posts
    3

    Contact Service

    My nokia 8310 says Contact service when i turn it on, doesn't do anything but that. i have a F/Mbus cable wich i connect to my computer, and i can get my phone into Test Mode but i cannot unlock or reset it? have you got any ideas of how to reset it ? or etc. Flash it to 8310 from new again?
    thanks for your help in advance.

  2. #2
    Join Date
    Nov 2002
    Location
    No Comments
    Posts
    79

    It looks like it is a............

    THe startard question that I must ask have you drop your phone or have come in connect with any water.......
    The anwser must be yes............. of course
    I belive it is hardware problem try change the IC more like you will have to change 2 IC>>>>>>>Don't Worry it is a small problem....
    HOPE THAT THIS HELP YOU TO GET YOUR FONE BACK TO LIFE

  3. #3
    Join Date
    Dec 2002
    Location
    denmark
    Posts
    3
    the answer to the question you asked ( if it had been in contact with water ) would be NO, and i found out that i both resetted it and unlocked it except for 1 code, a sim code from an old sim card!

  4. #4
    Join Date
    Nov 2002
    Location
    No Comments
    Posts
    79
    "would be NO, and i found out that i both resetted it and unlocked it except for 1 code, a sim code from an old sim card!"
    ???
    what talking u

  5. #5
    if contact service is caused by bad sp data use techtron's dct4 tools. u can find this software on this forum, just try a search..
    u have instrunctions inside software how to repair contact service.
    did a lot with this solution.

    if is caused by mcu,ppm fault u need to flash it again - u need dongle dct4 flasher for this...

    if is hardware...
    Bau !

  6. #6
    Join Date
    Dec 2002
    Location
    denmark
    Posts
    3
    but where do i find a flashing program that works with windows Xp and my nokia 8310, i checked my cable and it says Fbus.. but i bought it as f/m bus.. ? i have the flashfile for the phone, just dunno how to flash it TO the phone =) looking forward for your reply!

  7. #7
    flasher works on lpt not com port.
    i need special dongle and cables for flashing...

    try first the solutions i have gave u.

    if the phones does not work...go to someone who has already a flasher...i believe that an 8310 does not woth a 150$ dct4 flasher...don't u think?
    Bau !

  8. #8
    Join Date
    Nov 2002
    Location
    No Comments
    Posts
    79
    Alinus it is not matter of worth or not worth, what I feel is the fun of getting a fone back to life can be quite fun .....
    AS they say never judge a fone by its cover....



    >>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<
    NeophyteDK learning is fun, sorry that i did not help much

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •