Flashing 3410 problem

[martinzaloudek]

Which program can I use to flash nokia 3410. Rolis and Knok don't work.

I thing, that original dejan flasher would work. Bud I don't know, how I must set up (which bootloader,...).

Please help me. Thanks

[gkagg]

Try this one ...

[martinzaloudek]

Id doesn't work

[Vinny]

Try this ...

[aZyWeRks]

use rolis, again. set it to 3330.

its basically the same flash ic.

[Yummieee]

²martinzaloudek
Rolis works with 3410!
Just choose 3330 as your model.

EDIT: Hmmm. Somebody was faster than me

[martinzaloudek]

Are you realy try flash 3410 with rolis??? Or it is only theory that it should work?

[Yummieee]

I have a 3410 too. THAT WORKS FINE WITH 3330

[martinzaloudek]

After reading fullflash by Rolis has written error: "mobile choose is wrong" and
"Tune CHK test.....Failed.(readed 0x027A,calculated 0x82DC)"

I didn't risk writing flash into phone.
Is it normal??

[gatsby76]

dude use KNOK i have attached it here

this has option for 3410 -- it works a little slower than rolis but is well reliable !!

[martinzaloudek]

There is not 3410. Only 3330 and next is 5110 (look to config/models.cfg). I try to add 3410 to this file, but it isn't work)

[Yummieee]

²martinzaloudek
It's normal. Only the Flash-size does matter.
3330 and 3410 have the same size, so you can flash/read the 3410 with the option 3330.
Hey! You can ask everyone who has the 3410. THAT WORKS.

But you mustn't correct the checksums using rolis (3330)

[martinzaloudek]

Very thanks all. Rolis really work. Bud I have second problem.
Phone doesn't register to network.
I use PPM Manager 0.91 to update CRC. I think, that this program can't update CRC correctly on 3410. Can you advise any other program for update CRC (I don't think FADI, bud MCU and PPM checksum).

[Yummieee]

You have to kill Flashcheck/Faid!

Open g3n0lite 1.7
Load your Backup (without eeprom)
klick "kill mcu chk" then kill "flashcheck/faid" then "fix all checks"
save your file
flash into phone
set faid

then you'll never have to set faid anymore