give me your opinion

[teleiomenos]

i have take a mcu from a mod (the mod is 5.79 for 3310) and ppm pack c v5.79 the problem is that i joined the two files but when i flash my 3310 i have no signal i correct checksum but nothing...i faid change imei reset sp locks but still nothing what i do wrong?
and something else when i open mcu with aw2d says "his is not a wintesla valid file"i try to convert it with knok but nothing i dont remember how i join the two files neither flash joiner or c:\> copy /b mcu.fls + ppm.fls fullflash.fls..plz help me

[Twister]

Try the Rolis flasher. Load MCU and PPM and flash your phone with it.

[teleiomenos]

i tried also rolis flasher but when i load mcu there is a rolis problem:
"NHM-5 yet supported mcu sw images:
-binary 0x130000 byte size mcu sw image,
-Dejan 0x130000 byte size mcu sw image,
-wintesla mcu sw ppm image"
but when i load ppm works ok

[Twister]

I think there is a problem with your mcu file. Try to download mcu file again, it will work

[teleiomenos]

yes but if i change mcu i ll lost my modified menu,siganl/battery bars and other...so i dont know what to do

[Al]

Use kNok for flashing, you can download it from my webpage
That's Rolis Flasher bug, coz new versions sw for 3310 has MCU size 0x140000.

[Twister]

Hmm, I understood. I think you downloaded a modded flash and you wanted to change its language pack, because of this you splitted the flash file as "MCU" and "PPM". This makes mcu zone "corrupt", because nearly all of modders use G3n0lite. You must use a virgin flash and do the similar modifications. Modding is not so difficult. It takes a little bit time, but it's funny.

[teleiomenos]

i tried to flash with knok only the ppm from 0x340000 but:

FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : invalid NMP returned in phone RAM
FLS1_PreparePhone : detected NMP is NHM-5
FLS1_GeneralSendAlgoCodeDCT3 : checksum is BB8F
FLS1_GeneralSendAlgoCodeDCT3 : algo code seems to be running
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 00200000
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 0020021C
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 0032B930
CMD_handlecommands : cannot analyze phone

what i do wrong?

[sandra02]

i think the problem is also with the flash. Have you tried rolis 5.14 to combine your flash?