Help With Building A Flash Cable

[Kuchster]

I have done a little research, and from help of this forum i have found a design for a flash cable.

I will be using the 74HC14 Chip.

I will be building it like this:
Parallel Connector from pc > Box which contains IC > Serial connector on the box.

To this serial connector i will plugging in the data cables. (My data cables are Mbus cables, so i dont need to build the mbus thing).

The info i am after is what pins from the serial connector go to what pins on the phone.

Lets take a 3310 for example, 4 pins, GND, MBUS, TX, RX.

What pins on the serial connector go to what on the box?

Kuch

[Kuchster]

This is the Schematic i found for the flasher. I will be using this.

That is to parallel and serial socket.

From the serial socket, i need to know which pins in the data cable go to what pins on the actual phone connection..

Kuch

[Kuchster]

I think i have it figured out, i will post results when i build this.

Kuch