My 10th menu under Tones

[JUNT]

im using 3315 v633, i have 12 menus under Tones menu, what ive noticed after flashing, my 10th menu under Tones menu doesnt appear. why this happen? please help. thanks

[szczuru]

You must active net-monitor

[dvirus666]

Also check that your mask for the tone menu is set to 0x000000. This works for all menus.

[JUNT]

@ szczuru
After activating net monitor, what should I do.

@ dvirus666
What is this mask all about, please give me a hint or sample procedure.

[dvirus666]

here is the original line for the 3310 V 6.39 messages menu

@menu dispmode=0x80 mask=0x111832

Now if you look at the address 111832 using Memory Editor you will see info like FFFF or 00FF. ect (Depends on the menu you are viewing).

In binary this tells the menu which sub menus are ok to display (0) or not to display (1). So if you set the MASK to 0x000000 this will automaticly set that menu to show all sub menus.

The Erase messages are hidden using the old 0x111832 mask but if you use 0x000000 then it will be shown.