I want my 8850 like 3310 that can receive a lot messages.

I've trying make mailsuite for 8850v531 with Nokix V1.38
But i found ERROR running simulation.
Help....

I found DEAD ROAD to finish it.
Anybody help me...
Or anybody make it for me please....
----------------------------------------------------------------------------------------------------
# Processing started

# Verbose level: 1
# Output flash saving disabled.

# Input flash: 8850v531.fls
# Loading... OK

# Processing: MAP_FILESYSTEM1.nrx
Locate: PPM_STRUCT = 0x33F5E0
Locate: PPM = 0x340000
Locate: PPM = 0x340000
Locate: PPM_END = 0x3CFFFF
#############################################################
# NOT USING FREE EEPROM BLOCK, USING FLASH ROM
# Filesystem Mapped as follows:
# Main sector: 0x00340000
# File system length: 0x0010000
# Free sector: 0x00350000

# Processing: FILESYSTEM_MANAGEMENT.nrx
Parsing strings file: E:\NokiX_main\NokiX\scripts\FILESYSTEM_MANAGEMENT\FILESYSTEM_MANAGEMENT_PPM.txt
Locate: MCU_VERSION_STRING = 0x2001FC
Locate: FIRMWARE_TYPE = NSM-2
Locate: FIRMWARE_VERSION = V 5.31
Successfully added 17 strings.
#############################################################
# Installing filesystem...
disable_flash_vpp :0x002ECB7C
enable_flash_vpp :0x002ECB92
default_delay :0xC8
Locate: START_ENGINE = 0x288B62
Reserving RAM space: 128 (0x80) bytes at 0x1131CC (no defaults)
Locate: DELAY = 0x30B634
Locate: MEMCPY = 0x30BF68
Locate: DISABLE_IRQ = 0x2FB1A2
Locate: ENABLE_IRQ = 0x2FB1BC
Locate: MALLOC = 0x28923C
Locate: FREE = 0x288E54
Locate: EEPROM_READ_BYTES = 0x30A974
Locate: EEPROM_WRITE_BYTES = 0x30A944
Locate: MEMCMP = 0x30BB04
Locate: MEMSET = 0x30CBE0
Locate: TASKS_INIT_TABLE = 0x331990
Locate: TASK_0 = 0x2F6DA0
Locate: RESET_WATCHDOGS = 0x2E7D4C
Locate: STRLEN = 0x30CC7C
Locate: STRCMP = 0x30B870
# Done!
#############################################################
Locate: DIALOG_OPEN = 0x2703A4
Locate: GLOBAL_BUFFER = 0x136EA8
Locate: NTOA2 = 0x2EF0D8
Locate: ATOI = 0x30C600
Locate: NETMONITOR_STATUS = 0x13FC55
Created a dialog (type=READ_TOP, max_len=0, flag3=0x4) at 0x360C24
Created a dialog (type=READ_BOTTOM, max_len=0, flag3=0x0) at 0x360C40
Created a dialog (type=INPUT, max_len=512, flag3=0x40A) at 0x360C5C
Created a dialog (type=INPUT, max_len=60, flag3=0x40A) at 0x360C78
Reserving RAM space: 12 (0xC) bytes at 0x11324C (defaults at 0x3613DC)
Reserving RAM space: 60 (0x3C) bytes at 0x113258 (no defaults)
Locate: ACTION_OK_BACK = 0x43
Locate: ACTION_SELECT_BACK = 0x52
Locate: ISDIGIT = 0x30CC6C
Locate: SEND_MESSAGE = 0x301564
Locate: MESSAGE = 0x135D48
Locate: MESSAGE_ARGS = 0x135D50
Locate: MSG_ID = 0x135D4E
Locate: MSG_ARGC = 0x135D4A
Locate: MSG_ARGV = 0x135D50
Locate: DIALOG_CLOSE = 0x270164
Locate: MENU_DELETE = 0x27A566
Locate: MENU_OPEN = 0x27B488
Locate: MENU_ADD_ITEM = 0x27B654
Locate: MENU_REM_ITEM = 0x27A5A6
Locate: MENU_GET_ITEM = 0x27A520
Locate: SEND_XBA = 0x2409DA
Locate: XBUS_SEND_FRAME = 0x302506
Locate: STDIO_BUS = 0x361538
Locate: MALLOC_TRY = 0x2890A8
Locate: _CTYPE_ = 0x33DF21
Locate: __CTYPE_PTR = 0x361BD0
Locate: UDIVMOD = 0x30B59C
Locate: __UMODSI3 = 0x30B59C
Locate: __UDIVSI3 = 0x361BD4
Locate: W_GET_STRING = 0x2E2FB6
Locate: WCSLEN = 0x2E3048
Locate: GET_STRING = 0x2E329C
Locate: WCSTOSN = 0x2E2D3C
Locate: WCSTOS = 0x361BE0
Locate: CURRENT_LANGUAGE = 0x13FC30
Locate: VSNPRINTF = 0x361790
Locate: STRNLEN = 0x36153C
Locate: SPRINTF = 0x361B5C
Locate: STRCPY = 0x30CBF8
Locate: STRCAT = 0x30CBAC
Locate: PUTS = 0x3614F8
Locate: VPRINTF = 0x36149C
Locate: PRINTF = 0x3614E0
Locate: PUTCHAR = 0x361478
Locate: MENU_CREATE = 0x27B718
Locate: MENU_REOPEN = 0x27B7AC
Locate: NTOA = 0x2EF126
Reserving RAM space: 2 (0x2) bytes at 0x113294 (no defaults)
Locate: CURRENT_HANDLER = 0x13FC56
Adding 5E0 ID (0x100) to 5E0 table (func=0x360CC4, action=0x8, flags=0xA0)
Adding 5E0 ID (0x101) to 5E0 table (func=0x360EC0, action=0x8, flags=0xA0)
Adding 5E0 ID (0x102) to 5E0 table (func=0x360F00, action=0x8, flags=0xA0)
Adding 5E0 ID (0x103) to 5E0 table (func=0x360CC4, action=0x8, flags=0xA0)
Adding 5E0 ID (0x104) to 5E0 table (func=0x3610BC, action=0x8, flags=0xA0)
Adding 5E0 ID (0x105) to 5E0 table (func=0x361180, action=0x8, flags=0xA0)
Adding 5E0 ID (0x106) to 5E0 table (func=0x36124C, action=0x8, flags=0xA0)
Adding 5E0 ID (0x107) to 5E0 table (func=0x361298, action=0x8, flags=0xA0)
Adding 5E0 ID (0x10 to 5E0 table (func=0x361308, action=0x8, flags=0xA0)
Done!

# Processing: MAIL_SUITE1.nrx
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\bmp_nm.bmp' at 0x361C10, type = BITMAP
Inserted image: 'bmp_nm.bmp' at 0x00361C10 Description: New mail icon
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\bmp_rec.bmp' at 0x361C2C, type = BITMAP
Inserted image: 'bmp_rec.bmp' at 0x00361C2C Description: REC: image
Reserving RAM space: 4 (0x4) bytes at 0x113298 (no defaults)
Locate: DRAW_BITMAP = 0x27F3C6
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\bmp_border.bmp' at 0x361C4C, type = BITMAP
Inserted image: 'bmp_border.bmp' at 0x00361C4C Description: Outlining border
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\bmp_mail.bmp' at 0x361D14, type = BITMAP
Inserted image: 'bmp_mail.bmp' at 0x00361D14 Description: Mail icon
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\fslash.bmp' at 0x361D24, type = BITMAP
Inserted image: 'fslash.bmp' at 0x00361D24 Description: Foward slash small font
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\dash.bmp' at 0x361D34, type = BITMAP
Inserted image: 'dash.bmp' at 0x00361D34 Description: Dash small font
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\colon.bmp' at 0x361D44, type = BITMAP
Inserted image: 'colon.bmp' at 0x00361D44 Description: Colon small font
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\a.bmp' at 0x361D54, type = BITMAP
Inserted image: 'a.bmp' at 0x00361D54 Description: A small font
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\p.bmp' at 0x361D64, type = BITMAP
Inserted image: 'p.bmp' at 0x00361D64 Description: P small font
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\marked.bmp' at 0x361D78, type = BITMAP
Inserted image: 'marked.bmp' at 0x00361D78 Description: Marked image
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\bmp_contact.bmp' at 0x361D8C, type = BITMAP
Inserted image: 'bmp_contact.bmp' at 0x00361D8C Description: Marked image
Inserted 'E:\NokiX_main\NokiX\scripts\MAIL_SUITE\bmp_error.bmp' at 0x361DA0, type = BITMAP
Inserted image: 'bmp_error.bmp' at 0x00361DA0 Description: Error image
ui messages dispatcher #1: 0x266730
ui messages dispatcher #2: 0x2BD40C
msg_proc_sms_received:2A91B0
msg_proc_sms_received_free:2A925A
msg_proc_sms_sent:2A9A78
msg_proc_sms_sent_free1:2A9AEE
msg_proc_sms_sent_free2:2A9B0C
hookpoint3: 0x00217062
unread_sms_count: 0x002A9B68
hookpoint2:0x00216FFA
Clock type: 0x13FC29
menu_close_all() function: 0x27B85C
get_sms_feild :0x002168B2
display_message_icon :0x000
proc_msg_sms_received :0x00216FBC
read_sms_to_buf :0x00216972
show_flash_sms :0x00216BBE
play_sms_tone :0x00216B6E
getsms_find :0x000
# ERROR: FINDBL: Start address out of range (0x!
# 192 +++ findbl getsms_find+8
# Error 4 running "E:\NokiX_main\NokiX\scripts\MAIL_SUITE\MAIL_SUITE1.nrx", line 192: Program interrupted

# ERROR: Script failure!
------------------------------------------------------------------------------------------------------------

What should i done for finished it.
Thanks a lot man...