help- I loose signal when flashing after patching

[vbritez]

Hi

When I patch whit the nokiX any add-on even the true-7-bar.nrx my partial flash file from my 3390 and flash again the phone, i loose any signal and my phone reboot every 1 minute

If i go back whit the original flash file whitout patching, the phone works again

this is how i do it
1- take flash from phone whit read flash from the rolis
2- insert kill_fade_check.nrx, kill_mcu_check.nrx and anycode.nrx
3- reinsert the flash whit write flash and i get one warning from the eeprom

This problem is because the model of the phone or I’m doing something wrong
Thanks

[BlinK_]

add kill_faid_check.nrx and kill_mcu_check.nrx scripts to your project and everything will by fine. If you dont want these added then after any flash you must kill faid with Rolis Flasher.

[vbritez]

thanks blink

but i already try that and the problem persist right now i searching any info avaliable

thanks anyway mate

[joci2000]

It won't work until you calculate the faid again with any service tool like nokiatool 1.8 or dct-3 repair via m-bus cable. If you killed the faid with script, you also need to calculate the faid but only one time. And after if you use another killed software you don't have to calc faid again just simple will work. But if U use a original after this you need to calc the faid again.

[vbritez]

thanks for the tip joci2000

I'll do that, when i fix my mbus cable

thanks again mate's you really help me